Should i use danish oil

To put it simply, using this tung oil variant on wood surfaces gives it a dark rich finish that is incredibly water resistant. Applied to a bare wood such as pine or maple, it will darken the wood after a good coat.

However, how dark the wood gets will depend what color danish oil you use. You can get Danish Oil in a range of colors from Golden Oak to Black Walnut , but what will really determine the final color of your work piece will be the type of wood you are treating.

Danish oil is often used on softwoods such as oak and pine. That is because it helps to bring out the vibrancy of their timber by deepening their already rich rustic color. There are so many different brands of Danish oil on the market, but the most popular and reliable brands are Watco, Deft and Briwax Danish Oil.

Although Watco is by far the most popular brand among them. That means sanding it down where needed and making it smooth. Set up your work piece somewhere that is room temperature, well ventilated and free of dirt and dust. Use a quality wood finishing brush apply a thick first coating across the entire surface of the wood. Once done, leave it to dry for minutes before returning to apply another coating on the work piece.

It is worth noting that one coat of Danish oil is not enough. This will help to get rid of any scratches or pores left on the surface. If you use turpentine, get the kind that is made from pine. This smells much better than other kinds of turpentine. When you mix your own Danish oil, do it in a glass jar with a metal lid. If you use a plastic container, oxygen can get into the mix and over time can ruin the finish. A glass jar sealed tight with a metal lid will have a longer shelf life.

They claim to follow FDA regs that makes it safe to use on kitchenware and toys. Thanks for stopping by, and be sure to sign up below so I can send you blog post updates, plus some free plans and templates. Beginning Woodworking? This page may have affiliate links. For more information see my disclosure page. About The Author Adam has been woodworking for the last 10 years. He considers himself a 'Small Shop Woodworker' and practices his hobby in his garage.

With the lack of time, space, and proper tools, he always finds ways to get great results without over-complicating or over-thinking the process. Various shop jigs, table saw sleds, and tricks of the trade have served him well. God has blessed him with a beautiful family, as well as a passion for teaching others about woodworking.

You can read more about Adam here. A really helpful instructive article on using Watco Danish Oil finish. His method was to use the slurry method over a week and wiping off the excess as it dried between coats. Then let it dry over a week and wiping off the excess oil everyday that bleeds out over that week. I then used a pleasant smelling paste wax like Briwax. I use only this type of finish technique for all jewelry boxes and even applied it to a antique dresser that I still own.

Great tips Gary, thanks. And often a single slurry coat or 2 is not enough, so using different grits sounds like a great time saver. Thanks again Gary. Hello, I want to use a butcher block counter for a sewing table top.

I love the natural, light wood — it is Birch. Historically the term Danish Oil seems to have appeared when Scandinavian furniture, protected with an attractive low sheen finish, began to be exported around the world during the second half of the 20th Century. They are comprised of many different combinations of natural and synthetic varnish and resins, mineral oil, tung oil, linseed oil, poppy oil, cotton oil, sunflower oil, white spirit, naptha, driers, anti-skin agents, etc etc!

We are based in the UK, and when we began manufacturing our own oil products for wood we decided to find out for ourselves what was available here as as Danish Oil. Generally in the UK we found that Danish Oil usually has a low sheen finish, with a drying time of hours per coat. Bestwood Danish Oil is naturally water, food and alcohol resistant. It is safe for food contact when dry and can be used for wooden bowls, chopping boards and butchers blocks.

We do not use any synthetic or modified resins or varnish in our Danish Oil. Danish Oil is simple to use and easy to maintain. Damaged or scratched areas can easily be maintained by reapplication of BestwoodDanish Oil. Bestwood Danish Oil is suitable for use with all softwood and hardwood, including exterior oak and teak.

Danish Oil is best applied with a lint-free cloth e. T-shirt material. It may also be applied with a good quality brush. Danish Oil should be applied liberally and evenly. When using a cloth, use a circular or figure of eight pattern to work into the wood, and apply until the wood stops absorbing.

Allow to penetrate for minutes before wiping off any excess with a lint-free cloth in the direction of the grain.